trezor.io
Rate this file (Rating : 3.5 / 5 with 2 votes)
young brunette girl in the glass room with blinds
trezor.io

Young Brunette Girl In The Glass Room With Blinds

The most common window blinds are slat blinds, which consist of many horizontal slats, usually of metal or vinyl, connected with string in a way that they can be rotated to allow light to pass between the slats, rotated up to about 170 degrees to hide the light, or pulled up so that the entire window is clear. Vertical blinds consist of slats of stiffened fabric, plastic, or metal hanging by one end from a track; like the horizontal versions, the slats can be rotated 90 degrees to allow light to pass through or to fold up on one side of a door or window. Vertical blinds are very good at controlling how much natural or exterior light comes into a room, due to the ability of the slats to close tightly.
• Venetian
A Venetian blind has horizontal slats, one above another. Venetian blinds are basic slatted blinds made of metal or plastic; wooden slats are sometimes used but in the US these are now usually referred to as wood blinds or bamboo blinds. They are suspended by strips of cloth called tapes, or by cords, by which all slats in unison can be rotated through nearly 180 degrees. The slats can be rotated such that they overlap with one side facing inward and then in the opposite direction such that they overlap with the other side facing inward. Between those extremes, various degrees of separation may be effected between the slats by varying the rotation. There are also lift cords passing through slots in each slat. When these cords are pulled, the bottom of the blind moves upward causing the lowest slats to press the underside of the next highest slat as the blind is raised. A modern variation of the lift cords combines them with the rotational cords in slots on the two edges of each slat. This avoids the slots otherwise required to allow a slat to rotate despite a lift cord passing through it, thus decreasing the amount of light passing through a closed blind. Slat width can be between 16–120 mm, with 25 mm being a common width.
Related patents were taken out in England by Gowin Knight in 1760 and Edward Beran on 11 December 1769, but Venetian blinds were known to the French long before then, the French name for Venetian blinds being persiennes. In 1761 St. Peter's Church, Philadelphia had such blinds.

File information
Filename:388861.jpg
Album name:Babes
Rating (2 votes):44444
Keywords:#young #brunette #girl #glass #room #blinds
Filesize:62 KiB
Date added:Jun 20, 2011
Dimensions:800 x 502 pixels
Displayed:202 times
URL:displayimage.php?pid=388861
Favorites:Add to Favorites