Young Curly Blonde Girl Wearing A Headband In The Wind Farm With Wind Turbines

Another type of vertical axis is the Parallel turbine similar to the crossflow fan or centrifugal fan it uses the ground effect. Vertical axis turbines of this type have been tried for many years: a large unit producing up to 10 kW was built by Israeli wind pioneer Bruce Brill in 1980s: the device is mentioned in Dr. Moshe Dan Hirsch's 1990 report, which decided the Israeli energy department investments and support in the next 20 years. The Magenn WindKite blimp uses this configuration as well, chosen because of the ease of running.
Subtypes of the vertical axis design include:
- Darrieus wind turbine
"Eggbeater" turbines, or Darrieus turbines, were named after the French inventor, Georges Darrieus. They have good efficiency, but produce large torque ripple and cyclical stress on the tower, which contributes to poor reliability. They also generally require some external power source, or an additional Savonius rotor to start turning, because the starting torque is very low. The torque ripple is reduced by using three or more blades which results in greater solidity of the rotor. Solidity is measured by blade area divided by the rotor area. Newer Darrieus type turbines are not held up by guy-wires but have an external superstructure connected to the top bearing.