Blonde Girl With A Diving Mask In The Sea

To prevent a mask from fogging up due to condensation on the glass plate many divers spit into the mask, wipe the spit around the inside of the plate and wash it out with a little water. There are commercial products that can be used as an alternative to the saliva method.
Refraction of light entering the mask makes objects in salt water appear about 34% bigger and 25% nearer when underwater, as shown in the underwater vision article. As the diver descends, the water acts as a colour filter eliminating the red end of the visible spectrum of the sunlight entering the water leaving only the blue end of the spectrum. Depending on the depth and clarity of the water, eventually all sunlight is blocked and the diver has to rely on artificial light sources to see underwater.
A variety of prescription lenses can be fitted inside the glass plate of the mask to correct some visual problems underwater. Divers may be able to use contact lenses inside the mask but they must keep their eyes closed if they remove the mask underwater to avoid losing the lenses. Double-dome masks restore natural sized underwater vision and field of view, while also correcting for a certain range of myopic vision. Mask removal and refitting is a basic skill that all divers are taught so that the diver can overcome floods or the mask being dislodged without panic.
When entering the water while wearing the mask, the diver normally needs to place a hand over the mask to disrupt fast water flow during entry. This prevents the mask from becoming dislodged or the glass damaged. Alternatively, a diver can enter the water with the mask off and then put it on or use an entry method such as the "forward roll", where the diver rolls forward with head entering the water first, which does not result in fast water flow over the mask.