Red Haired Girl In The Sea Posing In Front Of The Camera

Camera designs
Plate camera
The earliest cameras produced in significant numbers used sensitised glass plates and are now termed plate cameras. Light entered a lens mounted on a lens board which was separated from the plate by an extendible bellows. Many of these cameras, had controls to raise or lower the lens and to tilt it forwards or backwards to control perspective. Focussing of these plate cameras was by the use of a ground glass screen at the point of focus. Because lens design only allowed rather small aperture lenses, the image on the ground glass screen was faint and most photographers had a dark cloth to cover their heads to allow focussing and composition to be carried out more easily. When focus and composition were satisfactory, the ground glass screen was removed and a sensitised plate put in its place protected by a dark slide (photography). To make the exposure, the dark slide was carefully slid out and the shutter opened and then closed and the dark-slide replaced. In current designs the plate camera is best represented by the view camera.